Adds concealed deadbolt security to most wood or hollow metal doors,* with the added convenience of
electrical operation.
Fail-secure operation (locks if power
is lost).
Stainless steel bolt, 5/8" diameter,
5/8" throw.
Includes control wire which allows for releasing without cutting
unit's power.
Incorporates manual lock/unlock cylinder to operate the
SD-997A-DQ
if power is lost (turn lock knob from inside protected premises and/or use key from outside
protected premises).
Door open/close monitor (NO/C/NC).
Magnetic switch senses door position for
positive locking.
Solenoid attempts to lock several times and then shuts down if door not closed properly to prevent solenoid from burning out. Once door closed properly will
automatically lock.
Use with an optional digital keypad for high security
without a key.
Easily connects to
SECO-LARM'sSK-983AElectronic Keypad.
Suitable for office-type applications.
Shallow design for use with most metal
door jambs.
No limiting installation orientation.
Powered by a solenoid.
Stainless steel for strength and long life Operatiing lifetime:
1,000,000 operations.
Adjustable door lock delay timer -
(0, 3, 5, or 9 seconds).
Power 12VDC, 880mA on activation,
330mA on standby.
Over-current protection 1.5A.
With control wire which allows for releasing without cutting
unit's power.
Stainless steel bolt, 5/8" diameter,
5/8" throw.
Lock body (faceplate) dimensions - 7-7/8"x1-5/16"
(200x32 mm).
Strike plate dimensions - 3-9/16"x1"x1-1/8"
(90x25x3 mm).
Plug: Special conic cavity stainless steel
(thickness 1.5mm~1.8mm).
*The SD-997A-DQ is designed for hollow metal door frames. It is not recommended for wooden door frames. However, the door can be wood or metal. Note: SECO-LARM also provides an electric deadbolt for Fail Safe operations, the SD-997BQ.
